Yes, the imprinter can print the same value as the counter value for a file name. For details, refer to the following setting procedure.
Setting procedure
- Start PaperStream Capture and select [Configure Jobs] from the menu
.
- In the job list, create a new job or to edit an existing job.
- Specify the following settings in [File Properties] under the [3. Destination] tab.
a. To sync with the page counter:
- Select [Print page count].
- Click [File Name Option] and add [Page Counter] to the file name.
b. To sync with the sheet counter:
- Select [Print sheet count].
- Click [File Name Option] and add [Sheet Counter] to the file name. - Click the [Counter] button to the right of File, select the initial counter value settings in the [Counter Options] window, and then click [OK].
- Click the [Save] button to save the changes.
- Click the [Close] button to finish configuring the job.
Tips!
If you want to print characters other than counters, configure the following setting for [String] under [Imprinter] in the settings window of the PaperStream IP driver.
Example: Test %04ud
Test: character string (fixed value)
%04ud: 4-digit counter (set the same number of digits as a counter value used for a file name)
Test: character string (fixed value)
%04ud: 4-digit counter (set the same number of digits as a counter value used for a file name)
Attention:
In the following cases, the file name and imprinter counters are not synced:
For details, refer to the PaperStream Capture Help.
a. For the Page Counter
- The number of pages scanned by the scanner and the number of pages recognized by the software do not match, due to blank page deletion, multi-image output, or any other reason
- In duplex scanning mode, the imprinter prints characters on the back side
- A separator is used or the number of pages is specified to divide a document stack into multiple stacks
- The page counter or the page output order is changed after scanning finishes and before a release process starts
b. For the Sheet Counter
- The number of sheets scanned by the scanner and the number of sheets recognized by the software do not match, due to blank page deletion, multi-image output, or any other reason
- A separator is used or the number of pages is specified to divide a document stack into multiple stacks
- The sheet counter or the sheet output order is changed after scanning finishes and before a release process starts